Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

whats going on with my feed pump?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2
Joined: Mon Jun 14, 2010 4:53 pm
Location: townsville

whats going on with my feed pump?

Post by paul.b »

the feed pump on my 2h is blowing pressure backwards, not sucking. so when i bleed it, it will run for a minute then die. i put a hose from the intake side of the pump to a bottle of diesel to see and when i started it, it was blowing bubbles instead of sucking fuel in???

why????????
Top
Posts: 286
Joined: Mon Jul 25, 2005 8:06 pm
Location: N.Q.

Post by bigbrowndog »

Image
Image
Top
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Post by Clanky »

I would say its sucking air, and the test on page 2 of the scanned manual should confirm this.
See if Toyota or Terrain Tamer do a rebuild kit for it, or grab another one.
Top
Posts: 10
Joined: Tue Sep 08, 2009 2:58 pm
Location: WESTERN SYDNEY

Post by mattmudpig »

Hello, I had the same problem, it was a crook hose between the injector return pipe to the lift pump banjo, it is a small rubber hose, about 4 inches long, they wont leak fuel but will introduce air into the system, hope this helps you.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests