Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How Do You Snatch an NM (monocoque)??

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

How Do You Snatch an NM (monocoque)??

Post by bigbluemav »

As above, just so I know how to IF my wife gets bogged on the beach (or elsewhere).

Where are recovery points or do I need to fit some and what are the rules for using/fitting them?
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Posts: 234
Joined: Tue Apr 03, 2007 7:05 pm
Location: Melburn!

Re: How Do You Snatch an NM (monocoque)??

Post by Dexter »

Not sure of the actual location but it would be a good idea to get a tree trunk protector to use to balance the load accross multiple points, that way you can protect the car as much as possible.
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Re: How Do You Snatch an NM (monocoque)??

Post by bigbluemav »

Hi Dexter

Yeah, I've got that covered, I have a 3m drag chain that has "eyes" on the end to balance the pull. I try to do this even with my chassis'ed 4wd's.
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Posts: 6
Joined: Wed Mar 25, 2009 8:09 am
Location: Central Coast

Re: How Do You Snatch an NM (monocoque)??

Post by nervis »

2 rated recovery points ont he front, you cant miss them. the rear, i snatch mine from the pin in the tow bar, the back also has 2 rated recovery points though.
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Re: How Do You Snatch an NM (monocoque)??

Post by -Scott- »

Ask, and you shall receive. :D

Mitsubishi Australia snatch NP Pajero

Thanks go to the Pajero 4wd Club of Victoria, and whoever is still hosting the video on photobucket. :)
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Re: How Do You Snatch an NM (monocoque)??

Post by bigbluemav »

COOL!

Thanks for that! More or less what I thought, but it is good to see it on video. Obviously THAT was made to show 'monocoque' doesn't mean 'weak'.

Thanks guys.
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Re: How Do You Snatch an NM (monocoque)??

Post by -Scott- »

bigbluemav wrote:Obviously THAT was made to show 'monocoque' doesn't mean 'weak'.
Precisely! I love this bit:
According to information from tests conducted in Japan prior to monocoque Pajero being released, this is more than enough to distort some conventional 4WD chassis.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest