Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Thermo fan help

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 403
Joined: Sun Jun 18, 2006 3:46 pm
Location: vic

Thermo fan help

Post by brentz »

Hey everyone was just wanting some advice about thermo fans and what's best?
I have a petrol 60 series and am going to put a thermo fan on it that I bought this weekend and it's a pull or pusher can be used as either was just wondering what works best I got enough room to put it in front of the radiator or behind?
Also if I put it in front should I keep the clutch fan to help that bit extra?
In advance thanks
brentz
TUF-60 starting build soon
Posts: 658
Joined: Wed Feb 13, 2008 5:41 pm
Location: Brissy

Re: Thermo fan help

Post by yamaha__308 »

Your stock clutch fan is going to flow more air than a thermo. Have you got cooling problems? Is the clutch fan shrouded properly?
Posts: 403
Joined: Sun Jun 18, 2006 3:46 pm
Location: vic

Re: Thermo fan help

Post by brentz »

Yer it likes to get hot abit so I bought a thermo fan to just help it out and see if it makes a difference
you think I should get standard Clutch fan and add the thermo just as a help?
brentz
TUF-60 starting build soon
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Re: Thermo fan help

Post by RAY185 »

Thermo in front will just block air flow to the rad. As said, fix your cooling system. Your stock clutch fan should be more than adequate if it and the rest of your cooling system is working correctly.
Posts: 403
Joined: Sun Jun 18, 2006 3:46 pm
Location: vic

Re: Thermo fan help

Post by brentz »

Ahh okay cheerz mate I'll have a play
brentz
TUF-60 starting build soon
Posts: 404
Joined: Sun Jan 11, 2009 6:39 pm
Location: serpintine wa

Re: Thermo fan help

Post by hillbilliywheelchair »

hows the clutch on your fan it may need replaceing or re oiling
thanks jono
Skip 1995 tdi disco the new tourer
Tin Worn the scat crawler with charade (fwd) motor and auto patroll transfer and locked yota diffs all for under $1000
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Re: Thermo fan help

Post by KiwiBacon »

The fans sold as generic pusher/puller types are junk. Complete junk. The simple fact that they work equally well pushing as pulling means they are terrible at doing both and they never come with a shroud.

If you want to run thermo electric fans, find fans from a production vehicle that are close to the right size and use as much of the original shroud as you can. Unshrouded fans are useless.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests