Hi all,
Got a problem with the conection from wiring loom plug to 4WD actuator socket on the full time transfer case .It just worn out and the only way to get a positive connection and get it to Actuate is to get under the car every time and give it a wiggle
What have others done to repair this..............
I've tried to cabel tie it in place -works for a while then comes loose also tried to silicone it in -same works for a while then no good
Are these male /female conections replaceable from Mr Toyota if so could some one provide the PART NO.. please
I been told that the actuators cost a fortune so thats not the solution
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Transfer Case actuator conection 100 series
Moderators: toaddog, Elmo, DUDELUX
Transfer Case actuator conection 100 series
HZJ 105 WOMBAT-TD/I-3"lift -35s'- Locked
www.3rdrock4x4.com
www.3rdrock4x4.com
Who is online
Users browsing this forum: No registered users and 48 guests