Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
02 sensor
Re: 02 sensor
My 93 LWB G16B vit has a single wire sensor. I used a Bosch 0 258 002 014 when I replaced it last.
You might find that although you need a single wire sensor that you have a 4 wire plug at the harness (for heated type sensors used on later model vits). Thats what I found on mine but i do seem to have a hodgepodge of earlier and later parts bolted together.
You might find that although you need a single wire sensor that you have a 4 wire plug at the harness (for heated type sensors used on later model vits). Thats what I found on mine but i do seem to have a hodgepodge of earlier and later parts bolted together.
Give a man a fire and he's warm for the day, but set fire to him and he's warm for the rest of his life
'02 NM GLS 3.2DID ARB bar Bushskinz steps Rhino bars front air locker OME susp 265/75R16 AT's
'02 NM GLS 3.2DID ARB bar Bushskinz steps Rhino bars front air locker OME susp 265/75R16 AT's
Re: 02 sensor
the earlier 1993 ish ones had 1 wire, the later 1997 g16b with the internal coil in the dizzy used 3 wires, extra wires are for hego
Chop it drop it and big block it.
Re: 02 sensor
4 wire actually.MQHOON wrote:the earlier 1993 ish ones had 1 wire, the later 1997 g16b with the internal coil in the dizzy used 3 wires, extra wires are for hego
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Who is online
Users browsing this forum: No registered users and 0 guests