G'day -
I am thinking about using front hilux leaf springs under my zook, and something a bloke said had me wondering...
He said that lux leaf springs changed compound around 96 or so, and were now stiffer.
I am after 2 inch lifted springs, so that counts out Toyota ones I guess, is what he said correct about any others that you know of?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hilux springs
Moderators: toaddog, Elmo, DUDELUX
Re: Hilux springs
if your down in vic any time soon i have 4 front leafs and 4 rears.
i can even show you what lift it gave my hilux as i have put in new suspension but the height of the car is the same as before.
i can even show you what lift it gave my hilux as i have put in new suspension but the height of the car is the same as before.
Re: Hilux springs
Ha ha no i won't be coming down anytime soon, but I appreciate the offer of help.
Re: Hilux springs
in 1996 the hiluxes went to (or started going to) IFS, with longer rear springs so mo there would not be anything to worry about with the front springs because they no longer had leaves.
hilux front springs are a long spring to put in the front of a zook, my mate just recently put his rears in the front and hilux fronts in the rear (suzi rears are about half way from suzi fronts to hilux fronts) and it was good
i wouldnt worry about springs too much, just go to the wreckers and get some packs, play with leaves untill the ride and spring rate is nice and then go get them re-set to get the height you want.
hilux front springs are a long spring to put in the front of a zook, my mate just recently put his rears in the front and hilux fronts in the rear (suzi rears are about half way from suzi fronts to hilux fronts) and it was good
i wouldnt worry about springs too much, just go to the wreckers and get some packs, play with leaves untill the ride and spring rate is nice and then go get them re-set to get the height you want.
Many thanks to Buds Customs, for all their ongoing support
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Re: Hilux springs
I am just using the lux fronts for the rears in my zook, and the zook rears up front.
I also want to keep everything simple so that I can buy new parts off the shelf, rather than making home brew spring packs.
Thanks for the info.
I also want to keep everything simple so that I can buy new parts off the shelf, rather than making home brew spring packs.
Thanks for the info.
Re: Hilux springs
i can understand not wanting to make your own spring packs, but honestly you will not get the same wheel travel out of stock springs, and remember, the springs are designed to hold up an engine so they are too stiff for the rear of the zook.
also say you do go all home brew, the worst that can happen is you fully bend a spring pack, put a trac bar in and this will not happen, the only thing that will happen is you will snap a main leaf, but seriously, how often does that happen, and if it does just source a new one and put it in your pack.
also say you do go all home brew, the worst that can happen is you fully bend a spring pack, put a trac bar in and this will not happen, the only thing that will happen is you will snap a main leaf, but seriously, how often does that happen, and if it does just source a new one and put it in your pack.
Many thanks to Buds Customs, for all their ongoing support
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Who is online
Users browsing this forum: No registered users and 4 guests