Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1.6 engine conversion
1.6 engine conversion
hey there, i recently picked up a vitara that had been crashed but not written off for a $1000
And im planning on doing the 1.6 into my sierra, from what i have gatherd you need a 1 inch body lift. which i have, you need an adapter kit.
but what about the wiring loom. do you use the sierra one or the vitara one?
also how long roughly does the conversion take.? cheers
And im planning on doing the 1.6 into my sierra, from what i have gatherd you need a 1 inch body lift. which i have, you need an adapter kit.
but what about the wiring loom. do you use the sierra one or the vitara one?
also how long roughly does the conversion take.? cheers
Re: 1.6 engine conversion
HOpe you have a suit mate!@
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Re: 1.6 engine conversion
Mate look in The Bible up the top of the suzuki section, this has been discussed many many times.
Re: 1.6 engine conversion
bible not working properlyPJ.zook wrote:Mate look in The Bible up the top of the suzuki section, this has been discussed many many times.
thanks jono
Skip 1995 tdi disco the new tourer
Tin Worn the scat crawler with charade (fwd) motor and auto patroll transfer and locked yota diffs all for under $1000
Skip 1995 tdi disco the new tourer
Tin Worn the scat crawler with charade (fwd) motor and auto patroll transfer and locked yota diffs all for under $1000
Re: 1.6 engine conversion
hillbilliywheelchair wrote:bible not working properlyPJ.zook wrote:Mate look in The Bible up the top of the suzuki section, this has been discussed many many times.
its working fine....
G16 vitara/baleno/swift engine conversion
http://www.outerlimits4x4.com/viewtopic.php?t=44981" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=43769" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=78600" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=84485" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=89835" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=96993" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=112064" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=112381" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=112707" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=115843" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=123364" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=124706" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=125619" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=126869" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=129965" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=131257" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=131577" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/viewtopic.php?t=132368" onclick="window.open(this.href);return false;
http://www.outerlimits4x4.com/ftopic163442.php" onclick="window.open(this.href);return false;
http://outerlimits4x4.com/ftopic133395.php" onclick="window.open(this.href);return false;
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Re: 1.6 engine conversion
Why not use the trans from the vitara? You wont need a plate... Save the money on the plate and make the passanger side mount your self. If its a auto all you need to do is widen your trans tunnel. take off the transfer and use your old jack shaft.
I am sorry for being harsh but you are asking some fairly ummmmm stupid questions. Honestly think about what your asking. Why would you need the engine wiring loom out of the sierra (a carby) to run the 1.6 vitara (1.6 efi)engine?
Its good that you got the entire set up cheap but be sure you have some one around that knows what there doing and do a lot of reading before you just jump in.
As for time it takes. Mickeal (zooktastic) and I started at 12:30 today and we stopped at 2am. We are putting a dizy balino 1.6 in his. So far we have the engine in, I made the adaptor plate made and new motor mount. We swopped the cam for the angle drive modified the rear coolant outlet. We have the balino wiring loom all apart and ready for chopping.
In short we have it all 100% ready for the wiring and a few missing coolant hoses.
I have done this conversion a few times now and If you know what your doing it can be done in a weekend. But from the sounds of your questions I think we will be answering your questions for the next few weeks.
My suggestion is to get the engine in and all the coolant lines plumbed in then have a auto elect guy come out and do the wiring for you.
Finding some one in your area with it done already will help to. Look and take pictures.
I am sorry for being harsh but you are asking some fairly ummmmm stupid questions. Honestly think about what your asking. Why would you need the engine wiring loom out of the sierra (a carby) to run the 1.6 vitara (1.6 efi)engine?
Its good that you got the entire set up cheap but be sure you have some one around that knows what there doing and do a lot of reading before you just jump in.
As for time it takes. Mickeal (zooktastic) and I started at 12:30 today and we stopped at 2am. We are putting a dizy balino 1.6 in his. So far we have the engine in, I made the adaptor plate made and new motor mount. We swopped the cam for the angle drive modified the rear coolant outlet. We have the balino wiring loom all apart and ready for chopping.
In short we have it all 100% ready for the wiring and a few missing coolant hoses.
I have done this conversion a few times now and If you know what your doing it can be done in a weekend. But from the sounds of your questions I think we will be answering your questions for the next few weeks.
My suggestion is to get the engine in and all the coolant lines plumbed in then have a auto elect guy come out and do the wiring for you.
Finding some one in your area with it done already will help to. Look and take pictures.
Re: 1.6 engine conversion
yes your right it is a stupid question. hahaha
the vitara is a manual. so it will bolt straight up or will i have to fab up some mounts?
yeah the wiring loom is the hing that is confusing me.
the vitara is a manual. so it will bolt straight up or will i have to fab up some mounts?
yeah the wiring loom is the hing that is confusing me.
Re: 1.6 engine conversion
Yes, you will need to deal with a mount. For $200 you could buy BenT's kit which deals with that and if you spend a few hundred on ebay you can get a loom already done for you if you are not that capable.zakzammit wrote:yes your right it is a stupid question. hahaha
the vitara is a manual. so it will bolt straight up or will i have to fab up some mounts?
yeah the wiring loom is the hing that is confusing me.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Re: 1.6 engine conversion
http://cgi.ebay.com.au/Suzuki-Sierra-Sa ... 19bdc52316" onclick="window.open(this.href);return false;
http://cgi.ebay.com.au/Suzuki-Vitara-1- ... 3cad514ee3" onclick="window.open(this.href);return false;
http://cgi.ebay.com.au/Suzuki-Vitara-1- ... 3cad514ee3" onclick="window.open(this.href);return false;
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Re: 1.6 engine conversion
thanks cj. yeah i have seen benT adapter kit befor. looks decent but if i could use the vitara gearbox it would suit me better mine is making some weird noises in first and second.
Re: 1.6 engine conversion
Get hold of Ben and see if he will provide just the bits you need. You can use the Vit gearbox. Keep the section between the Vit gearbox and the t-case and get a bearing (180B rear wheel bearing I think ) and a seal and you will need to modify the mount.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Re: 1.6 engine conversion
why do i need to get these?get a bearing (180B rear wheel bearing I think ) and a seal and you will need to modify the mount.
Re: 1.6 engine conversion
go with a bent kit. yeh it sounds easy using the vit gearbox but the transmission tunnel, cross member and gearbox mounts all need modding and the gearbox is about a foot longer than the sierra box so a shorter jack shaft will need to be made and you may have alignment issues. i have used a adapter in a couple of cars and i have the vit box in my current/ongoing build. the adapter to me, is by far the better option.
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Re: 1.6 engine conversion
Since when has 80mm been a foot?mr green wrote:go with a bent kit. yeh it sounds easy using the vit gearbox but the transmission tunnel, cross member and gearbox mounts all need modding and the gearbox is about a foot longer than the sierra box so a shorter jack shaft will need to be made and you may have alignment issues. i have used a adapter in a couple of cars and i have the vit box in my current/ongoing build. the adapter to me, is by far the better option.
I agree about the need to alignment, a custom jackshaft, and tunnel mods, but the vitara gearbox is superior, as is the clutch - a major advantage of using the vitara gearbox.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Re: 1.6 engine conversion
I agree with Steve, the Vit clutch and gearbox are gar better options .. Keeping a 1.3 clutch alive and well behind a 1.6 (espeically if your gearing is not spot on) can be difficult.
You also get to keep the bigger heavier 1.6 flywheel.
You also get to keep the bigger heavier 1.6 flywheel.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Re: 1.6 engine conversion
how hard is it to mount the vit box though?
Who is online
Users browsing this forum: No registered users and 2 guests