ok im a bit stuck having never dealt with a sprung over 40
its been sprung over on drum brakes and runs a double arm its being converted to 60 series power steer
however the standard 75 series draglink wont fit the double arm as its the smaller 40 series i did consider a new steering arm but being drum brake they wont fit as its smaller pattern
the opwner doesnt want to go disk brakes at the moment so im stuck with what ive got
so really i need a tie rod to fit the 75 series draglink but that will fit the smaller 40 series steering arm
make sense ?? cause i hardly understand it
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
draglink for fj40 steering conversion
Moderators: toaddog, Elmo, DUDELUX
Re: draglink for fj40 steering conversion
You need a proper tapered drillbit and drill the arm out.
Has to be spot on.
Or convert to discs.
Or cut the end off a 75 series arm and weld that chit on there!
Has to be spot on.
Or convert to discs.
Or cut the end off a 75 series arm and weld that chit on there!
hands and mums dont count!!!
Who is online
Users browsing this forum: No registered users and 4 guests