Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hi guys
chasing some stainless steel tube for a snorkel i did a seach but nothing came to eye
iam wondering do they make 3.5'' tube the guy thats doing it said no but it doesn't hurt to ask
3'' is abit small i think and 4'' is abit of overkill , im located on the sunshine coast
where would be the best and cheapest place to souce it from and also some alloy for body lift blocks (And someone with a lathe )
cheers
Apparently 3.5" is mega expensive, stick to 3 or 4.
Also, this was covered in a thread on here, like less than a week ago. Do a search or just go through a couple of pages of threads.
)