Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bent diff housing, where to fix?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Bent diff housing, where to fix?
Hi, my hilux housing has been bent for some time now on the short side axel tube which chews out my tyres prematurely..
Can anyone recommend a place in/ around sydney that can straighten it and then weld in a gusset the make it stronger?
The reason i had come to the conclusion it is bent is the inner axle has always pulled hard against the seal and has always chewed it out within 12-18 months and the tyres have to be rotated alot other wise would be stuffed within 20,000 kms from brand new.
Cheers
Brad
Can anyone recommend a place in/ around sydney that can straighten it and then weld in a gusset the make it stronger?
The reason i had come to the conclusion it is bent is the inner axle has always pulled hard against the seal and has always chewed it out within 12-18 months and the tyres have to be rotated alot other wise would be stuffed within 20,000 kms from brand new.
Cheers
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Re: Bent diff housing, where to fix?
cheaper to find another housing, stick a gusset on it and put that in
Damien
--------------------------------------------------------
--------------------------------------------------------
Re: Bent diff housing, where to fix?
Yeh i thought of that but i can guarantee it is straight, thats why i was thinking of fixing the one i have..
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Re: Bent diff housing, where to fix?
Theres a few comp blokes that straighten axles fairly often up here that have a simple technique. If it is bent top in ( will be wearing inside of tyre) Bolt rims with no tryes to your front hubs, chain them to a decent steel girder/log (girder/ log under rims) and then jack up under the housing where it is bent. Use a level to get the bent side the same as the straight side. It wont be perfect but then what solid front axle is?
Wtb, 105 series rear tyre carrier, alloys and tyres.
Re: Bent diff housing, where to fix?
$800
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Re: Bent diff housing, where to fix?
1986 - Stage 1 V8 serIII style side ute - gone
1997 - 300 TDI 130 single cab ute - gone
1986 - 90 defender soft top, bars, buttons and tyres
2000 - TD5 disco 'the boss's rig'
1997 - 300 TDI 130 single cab ute - gone
1986 - 90 defender soft top, bars, buttons and tyres
2000 - TD5 disco 'the boss's rig'
Re: Bent diff housing, where to fix?
ha ha ha good one buddy, as said i agree with probably finding a new one
Many thanks to Buds Customs, for all their ongoing support
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Re: Bent diff housing, where to fix?
$800? to straighten or for the new housing?
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Re: Bent diff housing, where to fix?
new housing
buddy
buddy
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Re: Bent diff housing, where to fix?
cheers
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Who is online
Users browsing this forum: Bing [Bot] and 1 guest