Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 sitting 20mm lower on 1 side
Moderators: toaddog, Elmo, DUDELUX
80 sitting 20mm lower on 1 side
after noticing suspention was saggin on drivers side and almost rolling on its side when turning left ,I brought some new springs & fitted them up goin from a 2in to a 3in lift but still i've got the same problem although the sag is not as bad as previous and seems to be worse in rear possibly affecting the front .Any help would be much appreciated
Re: 80 sitting 20mm lower on 1 side
It's pretty common. Most springs are labled driver side and passenger side, however even when you have that right they can lean. Not much you can do except pack one side with coil spacers.
The rolling in corners is probably worn sway bar bushes/shocks. suspension link bushes are probaby ordinary too.
The rolling in corners is probably worn sway bar bushes/shocks. suspension link bushes are probaby ordinary too.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Re: 80 sitting 20mm lower on 1 side
yes very common problem can be due to bent spring mount or some accessory causing more weight on one side
as oldmate said coil spacers are the answer thats what my truck has in it
dont worry about it
as oldmate said coil spacers are the answer thats what my truck has in it
dont worry about it
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
1hdfte 80 series
LHD fz 80 series GX
Re: 80 sitting 20mm lower on 1 side
my 80 does the same thing. had to put a 30mm packer in the rear drivers side to fix it up.
80 xtra cab
Supercharged LS1, Locked n shit
80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Supercharged LS1, Locked n shit
80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Re: 80 sitting 20mm lower on 1 side
Are they dobbinson coils by chance?
Ive seen a few sets that were labeled wrong.
Ive seen a few sets that were labeled wrong.
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Re: 80 sitting 20mm lower on 1 side
I had two different dobinson coil sets and had the problem. I even swapped left and right sides, but the lean still stayed the sameZ()LTAN wrote:Are they dobbinson coils by chance?
Ive seen a few sets that were labeled wrong.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Re: 80 sitting 20mm lower on 1 side
yes they are dobbinsons. should there be a slight differance in the spring hights when side by side?and if so which is left & right? P.s I fitted them according to the way they were labled. and thanks for the feed back
Re: 80 sitting 20mm lower on 1 side
Ha Ha, Now we are getting somewhere x4 for dobbinson springs and sagging with a 25mm spacer on driverside.
Resident Terrorist
Re: 80 sitting 20mm lower on 1 side
I fitted a set of Dobbinsons to an 80 last week and had no problem. Front was perfect. Rear was pretty spot on too, 5mm higher on the right which is SFA as far as I'm concerned.
Re: 80 sitting 20mm lower on 1 side
Strikes me as odd that changing the springs from side to side wouldn't fix the problem.
Especially if you are blaming the springs.
Mine has a 15 mm lean and no matter where I put the springs (front or rear) it leans the same way. I am suspecting suspension geometry is the culprit.
But spacers fix the prob.
Cheers
Especially if you are blaming the springs.
Mine has a 15 mm lean and no matter where I put the springs (front or rear) it leans the same way. I am suspecting suspension geometry is the culprit.
But spacers fix the prob.
Cheers
Who is online
Users browsing this forum: No registered users and 1 guest