Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
td42 turbo oil drain supply
td42 turbo oil drain supply
can anyone tell me if the t piecing the vaccum oil drain behind the altinator will work with a low mount manifold? and where i can get the lines and fittings from for the oil supply/drain?
89 Rosey Red TD[color=#400000][/color]42 Wags, highmount turbo 3" zorst, FR+R airlockers, 35" centipedes PSIDSL [color=#400000][/color]
Re: td42 turbo oil drain supply
Oil supply can be had from a small hex head bung on the left hand side of the engine almost inside the LHS engine mount. I checked my pics but I don't have any.........
Re: td42 turbo oil drain supply
yeh i no where to get the supply but i dont no what fittings to buy and i want to no if i can use the vac oil drain with a T peice with a low mount manifold or do i have to just drill the sump?
89 Rosey Red TD[color=#400000][/color]42 Wags, highmount turbo 3" zorst, FR+R airlockers, 35" centipedes PSIDSL [color=#400000][/color]
Re: td42 turbo oil drain supply
I think everybody drills the sump, I did.
Re: td42 turbo oil drain supply
yes there is a little hex key that is a oil supply and hey iv got a spare sump set up for a turbo hahahahaha
gq ute bobtaild shassy locked f+r 35s high mount and dints (chicks dig dints)lol
Re: td42 turbo oil drain supply
Oil drain to the sump. I drilled a hole then welded a steel threaded fitting in then screwed my brass fitting into that, nice neat and strong. I also used a t piece from the alternator oil line to feed my Turbo. I got a mate from pertec to make my lines and supply T fittings and tony powell for the sump fittings.
Cris
Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Re: td42 turbo oil drain supply
yeh if you were a good bloke juzz youd just swap me ya wanka!
89 Rosey Red TD[color=#400000][/color]42 Wags, highmount turbo 3" zorst, FR+R airlockers, 35" centipedes PSIDSL [color=#400000][/color]
Re: td42 turbo oil drain supply
guys im lookin at doin a turbo conversion on my td42 gq never done any turbo stuff before might be silly q im assuming you done drilling and welding on the sump out of the car?? im lookin at one those jdm performance kits or ive got a t3/t4 (fleabay style) turbo was gunna get a high mount man off fleabay and do the lot my self or at least what i can.... lol
Re: td42 turbo oil drain supply
yota eater wrote:yeh if you were a good bloke juzz youd just swap me ya wanka!
Oil feed, inside passenger-side engine mount. Do a search on the success rate of using this feed point re:removing the bung. My tips: use GOOD QUALITY TOOLS, and be ver patient!
Oil drain into sump - silver-soldered in.
There plenty of other pics and stuff on my build thread if you need it.
Who is online
Users browsing this forum: No registered users and 6 guests