Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Re coating spot light reflectors?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 211
Joined: Thu Oct 15, 2009 8:03 pm
Location: PORT STEPHENS

Re coating spot light reflectors?

Post by rowenb »

Can this be done and where to get it done? Have old cibie super oscars with faded reflectors and glass and wonderin if anyone can 'alumunise' the reflectors for a reasonable amount. Tryin to save money if possible beacause the reflector and lense is going for around $100 and new are $400 a pair. I already have 4 of the housings and want to spruce em up.
Posts: 36
Joined: Wed Mar 08, 2006 1:52 pm
Location: Sydney

Re: Re coating spot light reflectors?

Post by Scouse »

I had a pair of old headlight reflectors resilvered by Industrial & Decorative Plating at Lane Cove.
They were done around 20 years ago & they're still fine.

http://www.startlocal.com.au/industrial ... 97884.html" onclick="window.open(this.href);return false;
Scott

'87 RR
'96 RR
Posts: 211
Joined: Thu Oct 15, 2009 8:03 pm
Location: PORT STEPHENS

Re: Re coating spot light reflectors?

Post by rowenb »

Thanks mate but were your reflectors metal or plastic like mine?
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Re: Re coating spot light reflectors?

Post by chimpboy »

This is embarrassing but I once used chrome paint on some. The light output was honestly indistinguishable on the repaired side compared to the stock one.
This is not legal advice.
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Re: Re coating spot light reflectors?

Post by Ice »

chimpboy wrote:This is embarrassing but I once used chrome paint on some. The light output was honestly indistinguishable on the repaired side compared to the stock one.
its a little better than people using silver paint :)

im guilty of it too :)
xxxx wrote:
:bad-words: :snipersmile:
Posts: 42
Joined: Sun Sep 20, 2009 7:41 pm
Location: Newcastle

Re: Re coating spot light reflectors?

Post by squizzytaylor »

http://cgi.ebay.com.au/Cibie-Super-Osca ... 3f01f7874a" onclick="window.open(this.href);return false;

worth a shot eh!!
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Re: Re coating spot light reflectors?

Post by bazzle »

Search yellow pages for decorative platers. They do plastic and metal.

Bazzle
Posts: 36
Joined: Wed Mar 08, 2006 1:52 pm
Location: Sydney

Re: Re coating spot light reflectors?

Post by Scouse »

rowenb wrote:Thanks mate but were your reflectors metal or plastic like mine?
Mine were metal. Give them a call though, they had all sorts of weird & wonderful things getting done when I was there.
Scott

'87 RR
'96 RR
Posts: 249
Joined: Tue Nov 02, 2004 4:16 pm
Location: Melbourne, Australia

Re: Re coating spot light reflectors?

Post by Sammyboy »

I am restoring a Ford XC ute with the twin headlight grill (like the GXL / Cobra) and the driving lights of these 30 something year old cars are quite often damaged and faded. I frequently look on ebay and find places that actually do repair these driving lights, so maybe they would be worth a try for your cibie oscars?

http://cgi.ebay.com.au/FORD-GT-XW-XY-XA ... ccessories" onclick="window.open(this.href);return false;

I know it says Ford only, but maybe these people may be able to point you in the right direction. I hope that this info is ok for you, and not sending you on a wild goose chase!
1990 NG Paj TDI: 2.5 exhaust, 146l Longranger tank, snorkel, 2" suspension lift, 31" Bighorns.

1985 Holden Drover: 2" OME suspension & shocks, extractors, 2" exhaust, 235/75 MTR's
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest