Need to source a waterpump housing for my hj45 ute. The outlet where the bottom radatior hose connects has cracked off (was made of alloy, possible aftermarket replacement?). Motors a 3.6L H series diesel (model before 2H).
Does anyone have a good secondhand one or know were to get a new housing?
Ive tried burson, repco, terrain tamer, toyota themselves and assorted different wreckers and all i can find is a late model 2h housing which is slightly different from one wrecker who wont let me return it if it dosent fit......
any help would be great!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
HELP! Waterpump housing for H motor
Moderators: toaddog, Elmo, DUDELUX
Re: HELP! Waterpump housing for H motor
Let me have a look in my stuff tomorrow, i had a couple of H's before ditching the lot, might have one laying round.
want to snap a pic and throw it up so i can tell for sure if the spares i'm thinking about are the right one?
want to snap a pic and throw it up so i can tell for sure if the spares i'm thinking about are the right one?
Spit my last breath
Re: HELP! Waterpump housing for H motor
http://www.qldcruisers.com.au/
^^^They should be able to help you out, I've never had dramas sourcing bits for my H motor through them.
^^^They should be able to help you out, I've never had dramas sourcing bits for my H motor through them.
Who is online
Users browsing this forum: No registered users and 0 guests