Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

cutting gq dash

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

cutting gq dash

Post by WelchyGQ »

Hey,

Looking at ways to fit a roll cage into a gq single cab.

Has anyone cut the dash away so you get more "knee" room?

I have seen it dont ont he passenger side but not ont he drivers.

I realise the steering colum will still be there but would give more room once you were in there?

Any one have pics?

Thanks,

Welchy
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 116
Joined: Fri Feb 02, 2007 4:46 pm
Location: maryborough QLD

Re: cutting gq dash

Post by nisson35 »

mate i took the dash pad off and cut the ends off, put the cage in then worked out where the tube would be and cut to suit. welded it back in. With the dash pads do the same but use a hole saw and slice the pad back to the screen to fit past the pipe then put the piece you cut bakc in and cover with dash mat, it makes it look really neat.
YOU CAN FOLLOW ME BUT ITS GUNNA HURT!!
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Re: cutting gq dash

Post by WelchyGQ »

ah.. idont think we are talkign about the same thing.

where i put the cage is easy i want to see soem pics of people that have cut the lower part of the dash away so they have more knee room. Basicaly like when peopel cut the lower part of the passenger side of the dash and remove the glovebox so the navi has more room.

But want to do this ont teh drivers side as well.

Welchy
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Re: cutting gq dash

Post by toughnut »

Best thing to do is to pull the dash apart and have a look at what you are keeping and what you can ditch or move. Then make your desision based on that. You could make up a new panel that is removable so you can still access anything behind it so you could squash the space up a fair bit. There is a fair bit of room to be saved if you do it properly.
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Re: cutting gq dash

Post by WelchyGQ »

yeah thats what iwas thinkign but i thought some one might have photos or be able to help with advise, especially for the drivers side
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Re: cutting gq dash

Post by toughnut »

Bru 21 has done this a few times with the trucks he has built. He has done some nice work as well. Maybe send him a PM.
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Re: cutting gq dash

Post by WelchyGQ »

sweet as will do - did he do the drivers side as well?
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Re: cutting gq dash

Post by toughnut »

You could do a search for his builds on here. In one of his trucks he did a complete custom dash. It looked awesome. Very clean.

Edit: Here is the link to the build thread but its a bit old and most of the pics have gone. Bru21 might still have some of them though.

http://www.outerlimits4x4.com/viewtopic ... 16&t=25019
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests