Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Patrol diffs under Lux

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 64
Joined: Wed Nov 20, 2002 7:41 am
Location: Melbourne, Australia

Patrol diffs under Lux

Post by vrunner »

Did a trial fit of the Patrol diff under the Lux on the weekend :lol: . The Patrol axles are about 230mm wider than the Lux. I'm chasing ideas as to how to cover the front tyres without impacting on articulation. I don't think any of the moulded flair type products are going to cover the tyres. :cry:


Does anybody know of another way to add flairs or does someone make a fiberglass guard that is already pumped?
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Hypolux is already doin the same setup with his being later model its already slighter wider in body than the early mods.... with his lux setup ifs hub spacers and 1,1/2 wheel spacers on front and ifs rear housin and the same wheel spacers and cruiser offset rims he had a big area to cover ( will be slighter wider again with pootrol diffs) wen he competed at Nissan trials he fitted conveyoer belt for wheel coverage ..... i myself thought it would look like stuff that hypo normally duz GAY :D but it looks farken sweet as so take a look at his members section i think theres some updated piccys in there or check the old nissan trials thread
[b][i] DAN [/i] [/b]


:silly:
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

ill get some updated pix of how i did mine 2nite and post them later...

BTw wot suspension u plannin on running ???
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

yeah this is wot i did the night b4 the comp.

loox ok and it works
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

:D
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

:D
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

:D
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

:D
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 64
Joined: Wed Nov 20, 2002 7:41 am
Location: Melbourne, Australia

Post by vrunner »

Thanks Hypolux

Yeh i don't mind the look of those guards. Where did you get the conveyor belt from?

I've also looked at Zol's 1st Gen and am going to get onto him and find out about his guards.

I'm going to run all Patrol suspension. It will be a direct copy of GU wagon. That's unless someone here has a better idea. I already have all the bits to do the rear and am starting to gather the stuff to do the front.
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

yeah cool i gunna run leaves front and rear :)

if u going 2 the trouble of going coils in the front y use the radius arms ?? y not go 5 link ??
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

just another idea for the flares, you can buy black garden edging stuff from bunnings, comes on a 6m roll, for $25 and is 150mm wide. its not very flexable so its better to make them removable for the trail, this can be done easily with press studs and or zip ties or wingnuts

have a look in bigsteve's build up thread for how he did his ;)

http://www.outerlimits4x4.com/PHP_Modul ... &start=200
Posts: 64
Joined: Wed Nov 20, 2002 7:41 am
Location: Melbourne, Australia

Post by vrunner »

Good point Hypolux. is there anybody that sells a 5 link kit with the links and brackets?

Thanks for the link Antt, I'll take a look.
Posts: 186
Joined: Mon Nov 03, 2003 11:41 am
Location: Maitland

Post by MYV84B »

Will copying the Gu work im pretty sure the hilux chassis is narrower then gu trailing arm spacing ???? prob could be done im just thinkn out loud !!!

Wot power steer box ya thinken of runnen ????

have you thought bout were ya goen to put fuel tank the std nissan uppa mounts i think will interfier

R ya goen to move ya front diff forward much ??
Posts: 64
Joined: Wed Nov 20, 2002 7:41 am
Location: Melbourne, Australia

Post by vrunner »

MYV84B

I have measured the Patrol chassis and the Hilux chassis, the Patrol is 110mm wider than Hilux. I intend to run the rear end of the upper trailing arm on the inside of the bracket on the diff then make up and weld another support to pick up the inside of the bush. This will effectivly move the arm inboard by the width of the mount on the diff. Does that make sense?

Steering box will be GU patrol if it fits, it looks huge sitting next to the chassis. If that doesn't fit it will most probably be Navara.

Good point about the fuel tank, I hadn't even thought about that. I intend to run on gas as the 18R starts to starve of fuel when you get to about a 45 deg angle. I will look at a gas tank that will work with the mounts in place.

I intend to move the axle forward about 2-3 inches as the 35's are hitting on the rear of the wheel arch at the moment.

Have you moved your axle forward and what steering box are you running?
Posts: 186
Joined: Mon Nov 03, 2003 11:41 am
Location: Maitland

Post by MYV84B »

Yeah that makes sense ...r u goen to mount trailing arms on chassis similar to nissan style ???

How do you think the trailing arm length will be as a the chassis of a hilux with say 4 inch of lift and 35s will b a bit higher than a nissan chassis or are u goen to mount em under chassis ...

I ran a 75 series box moved as far forward on the rail as it could go

diff is about 4 - 5 inches forward
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest