Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Ln65going flat

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 150
Joined: Sun Mar 30, 2008 3:48 pm
Location: newy

Ln65going flat

Post by the_4br »

Replaced my battery in my 2.4d hilux and the new
one is going flat but I have no idea wat is makeing it go flat
the key is off the clock is off but the battery is nearly flat again
it will need a jump start to go again i put it in at about 9pm last night
any help would b great
Posts: 30
Joined: Mon Jul 27, 2009 5:54 pm
Location: brisbane

Re: Ln65going flat

Post by Lux_buck16 »

Hey mate have u checked your alternator is charging the battery also make sure u havent been leaving any accesories left on when u told your vechile off
Posts: 150
Joined: Sun Mar 30, 2008 3:48 pm
Location: newy

Re: Ln65going flat

Post by the_4br »

Yer the only thing the car has u could call an acc is the clock and I only
started the car 4 2 minutes to see if it would go and it did but now
it has .6volts 15hours later
if lifes a bitch.............deaths a sl*t cause death cums 4 all of us
Posts: 30
Joined: Mon Jul 27, 2009 5:54 pm
Location: brisbane

Re: Ln65going flat

Post by Lux_buck16 »

check the belts on the alternator arent lose or that your battery hasnt droped a cell if it has your up for a new battery as it wont charge
Posts: 68
Joined: Thu May 21, 2009 8:27 pm
Location: tassie

Re: Ln65going flat

Post by brissle »

try disconnecting the alt after youve charged the battery and see if it still drains the battery . Sometimes a short in the alternator will do this, other wise check for drain with a multimeter, disconnect negative and put the meter in line(between the terminal and the battery post) select Amps DC,should not really have anymore than 0.05A current draw.If you do, start pulling fuses to see which circuit its on
Posts: 150
Joined: Sun Mar 30, 2008 3:48 pm
Location: newy

Re: Ln65going flat

Post by the_4br »

Ok thanks I'll try that tomorro
if lifes a bitch.............deaths a sl*t cause death cums 4 all of us
Posts: 150
Joined: Sun Mar 30, 2008 3:48 pm
Location: newy

Re: Ln65going flat

Post by the_4br »

Hey thank mate it worked and all it was was that my brakelight sensor was stuck on
if lifes a bitch.............deaths a sl*t cause death cums 4 all of us
Post Reply

Who is online

Users browsing this forum: No registered users and 94 guests