Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

15x10 rims

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 182
Joined: Sun May 25, 2008 2:16 pm
Location: in the scrub

15x10 rims

Post by dont_follow_me »

Hi

does anyone know where I can get some 15x10 rims??? might have to get them made but if I could find a source for 'off the shelf' items that'd be great

cheers
Satnav with Teretts, now thats funny....
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Re: 15x10 rims

Post by 6.5 rangie »

eastern wheel works?
Damien


--------------------------------------------------------
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

Re: 15x10 rims

Post by def90 »

with the dollar at the mo, ure probably best importing them from across the pond.

but have to ask why 10's?
1986 - Stage 1 V8 serIII style side ute - gone
1997 - 300 TDI 130 single cab ute - gone
1986 - 90 defender soft top, bars, buttons and tyres
2000 - TD5 disco 'the boss's rig'
Posts: 182
Joined: Sun May 25, 2008 2:16 pm
Location: in the scrub

Re: 15x10 rims

Post by dont_follow_me »

to stop a 37 inch tyre rolling off the rim, most manufacturers recommend at least a 10 inch rim.

any ideas beside beadlocks
Satnav with Teretts, now thats funny....
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Re: 15x10 rims

Post by Bush65 »

IMHO if they are rolling off 8" or 9" rims without beadlocks, they will roll off 10" rims without beadlocks more often.

A substitute for beadlocks is screws - search pirate for the thread on this from inchworm (also look for inchworm in the vendors page on pirate).
John
Posts: 182
Joined: Sun May 25, 2008 2:16 pm
Location: in the scrub

Re: 15x10 rims

Post by dont_follow_me »

Bush65 wrote:IMHO if they are rolling off 8" or 9" rims without beadlocks, they will roll off 10" rims without beadlocks more often.
hows that work, the wider rim should make them seat better at low pressures......shouldnt they :roll:

why would the tyre manufacturer advise to use a 10 inch rim for a 37 when a 35 can be run on a narrower rim??? sorry, dont understand :shock:
Satnav with Teretts, now thats funny....
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Re: 15x10 rims

Post by TRobbo »

To remove a tyre from a rim you have to push the tyre sidewall in towards the centre.

To mount a tyre to a rim the tyre sidewalls have to push out to create a seal.

The wider the rim the further out the tyre sidewalls are pushed before they make contact with the rim and create a seal. Conversly the narrower the rim the closer the tyre will be to making contact with the bead without any pressure (air).

If your rim is too wide then when you deflate your tyres for bush work there is no pressure holding the tyre against the rim. The narrower the rim the less the external pressure needed to keep it in place.

I used to regularily run 10 inch tyres on 7 inch rims at 8 psi without problems. People on 8 ich rims with the same tyre would pop them off.

Hope this is clear
Warn - Dont leave home without it
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

Re: 15x10 rims

Post by def90 »

as above, and forget about what the manufacturers say, unless the tyre is 14.5" or wider keep to a 8" or 9" - 15 x 8, 16 x 8 or 17 x 9, u only 10's if ure a pootrool. alot easier to get rims this way too.
1986 - Stage 1 V8 serIII style side ute - gone
1997 - 300 TDI 130 single cab ute - gone
1986 - 90 defender soft top, bars, buttons and tyres
2000 - TD5 disco 'the boss's rig'
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest