Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
panhard rod on 4runner
Moderators: toaddog, Elmo, DUDELUX
panhard rod on 4runner
a friend of mine has some tough dog adjustable panhard rords of a nissan patrol. wondering if the rear will fit in my 90 4runner maybe if i change the bushes?
Re: panhard rod on 4runner
Hey
Just measure it up.
You will be missing the Proportioning valve bracket. (just weld on another)
The Bushes will be different. might be lucky if they fit or can find something similar.
Main things the length.
Hope that helps
Just measure it up.
You will be missing the Proportioning valve bracket. (just weld on another)
The Bushes will be different. might be lucky if they fit or can find something similar.
Main things the length.
Hope that helps
Eddie Dobbin & Sons - General Engineering -
Dobbin Engineering - X-Links - Steering Rams -
Davies Bros Productions - Disc brake conversions -
Dobbin Engineering - X-Links - Steering Rams -
Davies Bros Productions - Disc brake conversions -
Who is online
Users browsing this forum: No registered users and 63 guests