Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear sway bar bolt size? GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 38
Joined: Wed Jul 18, 2007 6:38 pm
Location: brisbane

rear sway bar bolt size? GQ

Post by 4wd_pig »

I'm after the bolts size and length for the bolts connect the rear sway bar to the bracket on the diff?
i have tried all different size bolt from metric, unc, unf etc and nothing fits the tread for the square nut that is welded on the inside.
Top
Posts: 404
Joined: Sat Feb 24, 2007 8:52 pm
Location: hunter nsw

Re: rear sway bar bolt size? GQ

Post by ssfabricator »

Everything on a gq is metric fine
hope this helps
If i just overtook you head to your nearest mechanic
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Re: rear sway bar bolt size? GQ

Post by coxy321 »

Have you tried running a tap or thread cleaner through it first, just incase its dirty/damaged/rusty?
Top
Posts: 38
Joined: Wed Jul 18, 2007 6:38 pm
Location: brisbane

Re: rear sway bar bolt size? GQ

Post by 4wd_pig »

i tried a metric fine thread but had no luck. ill run a tap through it tomorrow if i can get my hands on one.
thanks for your help.
Top
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

Re: rear sway bar bolt size? GQ

Post by GUEEY »

M10 x 1.25 pitch, bolts about 25mm long 14mm hex

Grant.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest