Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

winch problems

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 10
Joined: Mon Aug 23, 2010 7:29 pm
Location: brisbane

winch problems

Post by luvathemud »

hi all, got myself an ARB winch bar with WARN high mount winch for $400, just wanting to know were you buy parts for the winch, all solenoids have rusted terminals, stopping it from working, and its missing hand controller, cheers
gq wagon, 5 inch spring lift, 2 in body, 5 litre efi wheeza
Top
Posts: 324
Joined: Thu Aug 09, 2007 11:18 am
Location: Sydney

Re: winch problems

Post by Evski »

Not sure on the controllers, but I'm fairly sure you can get sealed solenoids from Paul at Tigerz 11 which will fit Warn control boxes.
Top
Posts: 227
Joined: Thu Dec 18, 2008 7:51 am
Location: Qld

Re: winch problems

Post by crunk81us »

can you not clean the terminals and put it back together?
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Re: winch problems

Post by bazzle »

luvathemud wrote:hi all, got myself an ARB winch bar with WARN high mount winch for $400, just wanting to know were you buy parts for the winch, all solenoids have rusted terminals, stopping it from working, and its missing hand controller, cheers
Im guessing ARB sell the parts too?

Bazzle
Top
Posts: 103
Joined: Thu Jul 16, 2009 6:54 pm
Location: somerville, victoria

Re: winch problems

Post by jemmos »

run 1 of those tigerz solinoids under the bonnet , then in cab switch. :armsup:
Top
Posts: 264
Joined: Mon Dec 08, 2008 3:54 pm
Location: melb

Re: winch problems

Post by cruzinnboozn »

Piss off the Warn stuff (Sols & Controler)

Contact Ben @ Tigerz11 or go to a Tigerz supplier - http://www.tigerz11.com.au/distributors.html

I had the same issue and got a new solenid, control box and handcontroler direct from Ben for less than anything Warn can supply ($175)

Warn stuff is way to expensive for what it is......
I got quoted $660 for a bare control box :shock: :shock:
Hand controler for $150.... :shock:
Sols $50 each and i would need 4 of them..... :shock:

The days of Warn being the best are very quickly going, if they have not already...
BadLux wrote:Get her nice and drunk take her to the beach and root her brains out! half way through pull out dip it in the sand and ram it back in.. will sort out all your problems
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Re: winch problems

Post by coxy321 »

x boggetyteen

Go and give the guys at Tigerz11 a call. Good and cheap!
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Re: winch problems

Post by Ruffy »

Sounds rooted... I'll give you your 4 hunjy back and take it off your hands.... ;)
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 321
Joined: Sun Sep 02, 2007 11:57 am
Location: Baulkham Hills, Sydney

Re: winch problems

Post by DX 80 »

I just put a Tigerz solenoid on my low mount. Easy to install and well priced.

Couldn't find too much info but are these the Titan solenoids?

Dave.
35's, F & R lockers, winch, turbo, yada yada.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 13 guests