Hi
Can anyone tell me what the suspension torque settings are for a GQ. We installed a 3" lift into my mates GQ last night, and just like to finish it off correctly. The GQ workshop manual link in the tech section does not seem to work. Inc upper and lower arms at the rear, and Panhards.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
suspension torque settings
Re: suspension torque settings
bolts have standard torques. google torque settings for 9/16th (14mm) bolts for the rear links i think its 3/4 (19mm) for the front radius arms including the pin and mushroom bushes in the back of the radius arm.
turbos are nice but i'd rather be blown
Re: suspension torque settings
just from one of my work books.
grade 8.8 metric fasteners.
M12 70lbft.
M14 110lbft
M16 160lbft
M18 240lbft
M20 330lbft
M22 440lbft
M24 570lbft
M27 840lbft
Grade 5 or better standard thread imperial
1/2" 75lbft
9/16" 110lbft
5/8" 150lbft
3/4" 265lbft
7/8" 420lbft
1" 640lbft
grade 8.8 metric fasteners.
M12 70lbft.
M14 110lbft
M16 160lbft
M18 240lbft
M20 330lbft
M22 440lbft
M24 570lbft
M27 840lbft
Grade 5 or better standard thread imperial
1/2" 75lbft
9/16" 110lbft
5/8" 150lbft
3/4" 265lbft
7/8" 420lbft
1" 640lbft
turbos are nice but i'd rather be blown
Who is online
Users browsing this forum: No registered users and 3 guests