Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series injector pump leak

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 288
Joined: Sat Mar 18, 2006 4:30 pm
Location: Darwin

80 series injector pump leak

Post by jsttry »

Well got under the car this arvo to check on a diesel leak I could smell. Not looking good..

Image

Leak Video - http://www.youtube.com/watch?v=EU1CbzYTlSs" onclick="window.open(this.href);return false;

Based on http://www.toyodiy.com/parts/p_G_1991_T ... _2203.html" onclick="window.open(this.href);return false; It looks like 22790A RING, O (FOR TIMER COVER)

Does anyone know if this sounds right? If so can this O ring be replaced while the pump is on the car or does it need it pulled off and overhaulled?
Posts: 24
Joined: Sun Feb 15, 2009 8:31 pm
Location: Sydney

Re: 80 series injector pump leak

Post by Green80 »

Had a late 80 series with the 1HD-FT in at work a couple of months ago with the same leak, also had cold running issues. Pulled pump off & sent away for overhaul, main housing was worn, fitted a new pump after the boss haggled with Toyota & waited a few weeks for it to come from Japan. Customer was rapt, come back asking if we fitted an additional turbo.
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Re: 80 series injector pump leak

Post by Dzltec »

The oring can leak where the unit bolts to the housing, it can also leak through the shaft of the main device. Its call an automatic cold start device. Can be tricky to do in the car but not impossible.


Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 49
Joined: Sat Jul 14, 2007 6:45 pm
Location: perth

Re: 80 series injector pump leak

Post by shlacks »

i had the same leak the housing does wear and have seen a few altho i found it easy enough to replace the part myself i did end up sending the pump to a pump place the get all upgraded parts put in it and cleaned up while off because i wanted to turbo the 1hz shortly after
Posts: 288
Joined: Sat Mar 18, 2006 4:30 pm
Location: Darwin

Re: 80 series injector pump leak

Post by jsttry »

The leak is actually coming out at the furthest point in the spring so could be the shaft. Let it warm up tonight and reduced from one drip per second to one drip per ten seconds. I might take it into the mechanic to see what happens
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest