I am after the measurements of a rear diff out of a IFS hilux. I am working on a hotrod at the moment and it has a early model hilux rear diff at the moment but the owner want a wider rear end. So im thinking of a later rear diff and some measurements would be great befor i go out and buy one.
Mark.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
WMS to WMS for hilux rear diff.
Moderators: toaddog, Elmo, DUDELUX
WMS to WMS for hilux rear diff.
Its not cool, unless it's got boost :)
Re: WMS to WMS for hilux rear diff.
the housing is 1330mm flange to flange, from memory about 50mm wider track
Re: WMS to WMS for hilux rear diff.
Std beam axle front - 55" or 1395mm (WMS to WMS)
IFS rear diff - 58" or 1470mm (WMS to WMS)
05 and on IFS rear diff - same width as 80 series Cruiser
IFS rear diff - 58" or 1470mm (WMS to WMS)
05 and on IFS rear diff - same width as 80 series Cruiser
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Coil SAS by www.budscustoms.com.au
Who is online
Users browsing this forum: No registered users and 8 guests