Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

aftermarket engine mounts vs genuine nissan

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 312
Joined: Sat Feb 08, 2003 12:49 pm
Location: Esperance WA, currently travelling around OZ

Post by GQ Toy »

Ended up making my own captive mount for mine using a rear control arm bush and housing. Bit of mucking around to get all square, but i will have to break bolts or chassis for the engine to move now. This was a for a 92 efi petrol - same as 4 bolt diesel mount. Should have made a stack of them as the local boys go thru mounts pretty quickly.
Posts: 2
Joined: Thu Sep 02, 2010 8:45 pm

Re: aftermarket engine mounts vs genuine nissan

Post by fatz fab »

Hey lads we are a new 4x4 fabrication shop in rockhampton QLD and have just made the left side un breakable engine mount for the nissan td42. by replacing just the torque side it prevents the right side from breaking if it is a genuine nissan mount. We have a few of our mounts getting around in some local trucks and have never had any probs. any questions my mob is 0401612929 FATZ FABRICATION
Posts: 57
Joined: Wed Mar 17, 2010 11:13 pm
Location: Kiev

Re: aftermarket engine mounts vs genuine nissan

Post by Mrowka »

Dear Mr. Superior, please produce 4-bolt and 2-bolt unbreakable engine mounts for us Nissan Patrol owners please.
Posts: 21
Joined: Sun Jan 16, 2011 4:12 pm

Re: aftermarket engine mounts vs genuine nissan

Post by blowngq »

Dig dig, but yea come on superior make them we need em.
Posts: 1152
Joined: Mon Sep 25, 2006 8:25 pm
Location: the most livable planet in the universe

Re: aftermarket engine mounts vs genuine nissan

Post by its aford not a nissan »

i just fixed mine so it wouldnt break again, i removed the thread and pin from the mount and replaced with a bolt that goes right through it , put a shockie rubber on then a washer and nut, no more vibes and i cant see anyway that i could break it short of a major accident

Image
Post Reply

Who is online

Users browsing this forum: No registered users and 65 guests