Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bundy clutch change

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 215
Joined: Wed Aug 06, 2003 9:29 am
Location: Perth, WA

Bundy clutch change

Post by Skip »

Took the Bundera down the drags a couple of nights ago and fried the clutch. Just wondering if I can change the clutch without removing the engine? Any tips or tricks anyone can offer?

Flogging R33 skylines is not worth melting a clutch :cry:
JZJ71G
Twin Turbo Cruiser
Top
Posts: 131
Joined: Sun Dec 14, 2003 9:57 am
Location: Melbourne

Post by Evan »

Beating skylines, way to go !
What times did it run ?
Sorry to hear about the clutch though.
Top
Posts: 215
Joined: Wed Aug 06, 2003 9:29 am
Location: Perth, WA

Post by Skip »

Best run was 14.2, could have gone quicker if it wasnt for the clutch.
JZJ71G
Twin Turbo Cruiser
Top
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

yeah it can be done and you dont even need to jack the vehicle as you can fit under it easliy. most times its easyier to unbolt the gearbox from the bellhousing the take out the gearbox then the bellhousing separate
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Top
Posts: 702
Joined: Mon Mar 10, 2003 4:51 pm
Location: Newman WA

Post by bundyboy »

yeh, did it about three months ago.
BABY red (GU ute)
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Ruggers wrote:yeah it can be done and you dont even need to jack the vehicle as you can fit under it easliy. most times its easyier to unbolt the gearbox from the bellhousing the take out the gearbox then the bellhousing separate


This isnt possible with a Bundy as the bellhousing to gearbox bolts are inside the bellhousing.
Top
Posts: 215
Joined: Wed Aug 06, 2003 9:29 am
Location: Perth, WA

Post by Skip »

RUFF wrote:
Ruggers wrote:yeah it can be done and you dont even need to jack the vehicle as you can fit under it easliy. most times its easyier to unbolt the gearbox from the bellhousing the take out the gearbox then the bellhousing separate


This isnt possible with a Bundy as the bellhousing to gearbox bolts are inside the bellhousing.


I was about to say that :(

Better start pulling things apart
JZJ71G
Twin Turbo Cruiser
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

id go the gearbox and bellhousing out rather than the engine. either way wont be fun. but gearbox is easier.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests