Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
after info or pic were people drilled to pass ecu loom
Moderators: toaddog, Elmo, DUDELUX
after info or pic were people drilled to pass ecu loom
i'm after some info of pic of where to put the hole for the holden ecu loom through the firewall i have a 85 hilux if someone got pic it would be great
Re: after info or pic were people drilled to pass ecu loom
you normally put it through passanger side straight under bonnet hinge and as close to top of inner guard., need to remove glove box first before you drill with hole saw,it's easer to remove big rubber gromet from wire loom and use smaller one, less size hole. not much room for computer behind glove box.
Who is online
Users browsing this forum: No registered users and 0 guests