, but i cant seem to get it to, does the front of the 3 speed convertor have to be modded?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
torque convertor diff between 3 and 4 speed auto
torque convertor diff between 3 and 4 speed auto
decided to go with a 3spd auto for the project insted of the 4spd auto that came with the 1.6 multi, tried fitting it up and misses out by about 5mm, the largest diametrs on the spigots are the same size on both convertors but the 4speed steps down at the front were as the 3 speed is 1 dia all the way along, by my measurements it should fit , but i cant seem to get it to, does the front of the 3 speed convertor have to be modded?
, but i cant seem to get it to, does the front of the 3 speed convertor have to be modded?buggy time............
Who is online
Users browsing this forum: No registered users and 0 guests