Hey all I have a 1991 Sahara 80 with the factory lockers. They are great but the factory switch annoys me a bit sometimes. You can have just the rear locker on or front and rear. You can't just have the front locker on.
Has anyone rewired these to 2 seperate toggle switches or anything simialr? I want to do this but i'm not too sure how compicated the wiring is behind the switch.
Thanks in advance.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Factory Locker Switch
Moderators: toaddog, Elmo, DUDELUX
Re: Factory Locker Switch
the locker function is controlled by an ECU module. I am fairly usre the ECU wont let the rear diff lock until the centre diff is locked, and it also wont let the front lock until the rear is locked.
You can bypass the ECU and use relays to operate the lockers in whatever order you like.
You can bypass the ECU and use relays to operate the lockers in whatever order you like.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Who is online
Users browsing this forum: No registered users and 0 guests