Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2.8 turbo questions

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 98
Joined: Sat Jun 11, 2005 5:41 pm
Location: anywhere with MUD, in NSW

2.8 turbo questions

Post by Stubbs »

G'day,

I have just bought a turbo kit from a 2.4 to fit on my 92 2.8d hilux, it has manifold, ct20 turbo, dump pipe, line and hoses and eerything. My main question is what else will I need to buy/install make this work to its potential?

Cheers, Stubbs
Drive Hard,Think Later
Posts: 117
Joined: Tue May 18, 2010 5:41 pm
Location: Brisbane

Re: 2.8 turbo questions

Post by ae86levin »

I'm in the same position as you. I have just bought the parts from a 2.4 turbo to install on my 2.8. I also got an injection pump with a boost compensator.
These are the two best step by step instructions I have found:

http://bjblaster.homedns.org/projects/a ... index.html" onclick="window.open(this.href);return false;
http://www.4wheeling.ca/showthread.php? ... ight=turbo" onclick="window.open(this.href);return false;

From my searching the main thing that can go wrong with this install is the oil return being spliced into the alternator return - it works for most but goes wrong for some. Below is a thread that shows in detail what can go wrong and how to avoid it.
http://www.outerlimits4x4.com/viewtopic ... ilit=braze" onclick="window.open(this.href);return false;

Other than this a pyrometer and boost gauge seems to be a good idea.
Posts: 98
Joined: Sat Jun 11, 2005 5:41 pm
Location: anywhere with MUD, in NSW

Re: 2.8 turbo questions

Post by Stubbs »

Thanks ae86levin, I have read the 4wheelin.ca site and that was pretty good, that other one is awesome too cheers.

Is a boost compensator needed or is it a bit of a finer tuning thing?

Cheers, Stubbs
Drive Hard,Think Later
Posts: 616
Joined: Tue Mar 29, 2005 6:56 pm
Location: Gympie

Re: 2.8 turbo questions

Post by Zookified »

A boost compemsator is deffiantely not needed as most of the turbo'd 2.8s out there arent running them.

I dont one and it runs fine. Once its on your truck get a dyno and fuel tune. Will greatly increase performance. A larger exhaust will help aswell, I am running 3 inch from the standard dump back
Posts: 98
Joined: Sat Feb 20, 2010 1:10 pm
Location: Morayfield, QLD

Re: 2.8 turbo questions

Post by Sam.BMX »

turning the fuel screw up slightly on the injector pump to give it just a bit more fuel will help with the turbo aswell
standard 93 hilux 2.8D. 33" khumo muds for play
Posts: 658
Joined: Wed Feb 13, 2008 5:41 pm
Location: Brissy

Re: 2.8 turbo questions

Post by yamaha__308 »

Stubbs wrote:Thanks ae86levin, I have read the 4wheelin.ca site and that was pretty good, that other one is awesome too cheers.

Is a boost compensator needed or is it a bit of a finer tuning thing?

Cheers, Stubbs
In effect, boost compensator's limit the fuel when off boost. Without one, the engine will run rich; no problem - just a bit of extra soot off boost.
Posts: 98
Joined: Sat Jun 11, 2005 5:41 pm
Location: anywhere with MUD, in NSW

Re: 2.8 turbo questions

Post by Stubbs »

Thanks all for the help and advice, I am just needing one more part for the air intake side of things and then set to go :armsup:

Cheers again, Stubbs
Drive Hard,Think Later
Post Reply

Who is online

Users browsing this forum: No registered users and 105 guests