Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Found an electric diff lock from 100 series, it is the complete front housing.
I have the standard hzj105r 1hz powered truck around the 04 model. can I just whack it in and connect power or is the gearing wrong?
if the gearing is wrong can i fit the centre to my gears? or does a specialist need to do it?
You would be looking at approx $300-$400 to have gears fitted in the diff, but its also not as easy as just hooking power up you will need either the orginal wiring or wiring it through 2 relays, as this is what i have done. can supply a diagram if needed.
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Found an electric diff lock from 100 series, it is the complete front housing.
I have the standard hzj105r 1hz powered truck around the 04 model. can I just whack it in and connect power or is the gearing wrong?
if the gearing is wrong can i fit the centre to my gears? or does a specialist need to do it?
cheers
you will also need the short side inner axle. it is longer than standard and has longer spline to carry the locking sleeve
RN wrote:pussy is out, its the log for me... Thank you Jesus.
