Gday all:
I had a bit of a problem with backfiring some time back (NL Pajero on gas). Amongst other things, the big bang blew the lid off the air cleaner housing and I lost a couple of clips. ANyone know of anywhere I can get some?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Air Filter Housing Clips
Moderator: -Scott-
Re: Air Filter Housing Clips
After getting sick of replacing the clips on my falcon, i used two rubber ocky straps wraps around and it works a treat.
Re: Air Filter Housing Clips
date wrote:Gday all:
I had a bit of a problem with backfiring some time back (NL Pajero on gas). Amongst other things, the big bang blew the lid off the air cleaner housing and I lost a couple of clips. ANyone know of anywhere I can get some?
Most wreckers will have em, they are quite a common part.
You can "tighten" them up a bit by popping them in a vice and giving em a bit of a squish lengthways ...
A backfire arrestor may be of use as well .. the bit of Swiss cheese pipe with a neoprene cover .. no issue on vacuum, but with positive pressure it lets it vent to atmosphere quite safely ... 1St one I made seems like 100 years ago for a mate with an XF on gas that used to destroy the gate style air flow meters on a regular basis...
Used a stubby holder .. I am sure there are commercial versions out there now that may be a bit larger and have a bit better flow.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Re: Air Filter Housing Clips
Love-mud:
Thanks for the info - we don't have much in the way of wreckers where I live, but I'll try them anyway. The backfire arrestor seems like a brilliant idea to me. Do you have any contacts where I can get one or at least get some idea of what to make up? The air hose is fairly short in my Pajero and also it has a convoluted bend in it before it gets to the inlet manifold, so there isn't much space to put anything in. Having said that, I certainly would like to get something - the existing plugs and leads are only 20000 km old and they recently have gone BANG again - I had a crook batch of gas. I have ordered new plug leads and plugs and when I egt them, I'll install them, hoping that they will reduce the tendency to crossfire.
The idea of a backfire burping out into the engine bay gives me the creeps - big sheet of flame, but it would all be over quickly and hopefully would not ignite anything else.
Thanks for the info - we don't have much in the way of wreckers where I live, but I'll try them anyway. The backfire arrestor seems like a brilliant idea to me. Do you have any contacts where I can get one or at least get some idea of what to make up? The air hose is fairly short in my Pajero and also it has a convoluted bend in it before it gets to the inlet manifold, so there isn't much space to put anything in. Having said that, I certainly would like to get something - the existing plugs and leads are only 20000 km old and they recently have gone BANG again - I had a crook batch of gas. I have ordered new plug leads and plugs and when I egt them, I'll install them, hoping that they will reduce the tendency to crossfire.
The idea of a backfire burping out into the engine bay gives me the creeps - big sheet of flame, but it would all be over quickly and hopefully would not ignite anything else.
Re: Air Filter Housing Clips
Love-mud:
Thanks for your help with the clips - I got a set from the local wrecker for $2.00. The dealer in Tamworth wanted $15.62 each, and he would have had to order them in! I would still like to know more about the backfire valve when you have the time.
Thanks for your help with the clips - I got a set from the local wrecker for $2.00. The dealer in Tamworth wanted $15.62 each, and he would have had to order them in! I would still like to know more about the backfire valve when you have the time.
Who is online
Users browsing this forum: No registered users and 0 guests