Im about to buy a model 3 bender just wondering what size die in inches i need for 32nb with 3.2mm wall thickness?
thanks in advance
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
JD2 bender
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: JD2 bender
if you are buying from OPW pete will have the right die for you.....
Harb
http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
Re: JD2 bender
I bought an australian metric bender (speedwerx), didn't realise you could buy metric dies for the american bender.johno88 wrote:Im about to buy a model 3 bender just wondering what size die in inches i need for 32nb with 3.2mm wall thickness?
thanks in advance
Last edited by 351ciofgrunt on Fri Oct 01, 2010 10:48 am, edited 1 time in total.
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
Re: JD2 bender
Its actually a 32NB die set. The OD is something weird like 42.7mm or something like that, but Pete has 32NB die sets which you can buy.johno88 wrote:Im about to buy a model 3 bender just wondering what size die in inches i need for 32nb with 3.2mm wall thickness?
thanks in advance
Cheers
Slunnie
Discovery TD5, Landy IIa V8 ute.
Slunnie
Discovery TD5, Landy IIa V8 ute.
Re: JD2 bender
Thanks guys, that is correct.
I carry all common metric & imperial die sets in stock..
Give me a buzz tomorrow or check this link out.
http://opw.com.au/_backup/fabrication.html" onclick="window.open(this.href);return false;
All details on there.
Cheers
I carry all common metric & imperial die sets in stock..
Give me a buzz tomorrow or check this link out.
http://opw.com.au/_backup/fabrication.html" onclick="window.open(this.href);return false;
All details on there.
Cheers
Tuff Events & Promotions Australia
www.tufftruck.com.au
OPW - Offroad Performance Warehouse
RENEGADE Motorhomes Australia
1300 OPW 4X4 - 02 9651 2334
opw.com.au
www.tufftruck.com.au
OPW - Offroad Performance Warehouse
RENEGADE Motorhomes Australia
1300 OPW 4X4 - 02 9651 2334
opw.com.au
Re: JD2 bender
Just for your interest....
I have bought mine from Pete.
I have an inch and a half and an inch and 3/4 die.
The inch and 3/4 die is only slightly bigger then the 32NB die, ( i think maybe 1mm ). Use this to bed up my 32NB black pipe bits and peices and you cant even notice an ovaling at all.
Screwy
I have bought mine from Pete.
I have an inch and a half and an inch and 3/4 die.
The inch and 3/4 die is only slightly bigger then the 32NB die, ( i think maybe 1mm ). Use this to bed up my 32NB black pipe bits and peices and you cant even notice an ovaling at all.
Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Who is online
Users browsing this forum: No registered users and 100 guests