Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

AVM HP hubs??????

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 150
Joined: Sun Jan 20, 2008 9:06 pm
Location: swan valley

AVM HP hubs??????

Post by uzdnabuzd »

Does anybody know if these new'"HP"avm hubs are any good?? Trying to work out if they are stronger than factory or not??
Posts: 171
Joined: Wed Jul 30, 2008 7:26 am
Location: Gold Coast

Re: AVM HP hubs??????

Post by DanwinGQ »

On ebay it states something about the high performance hubs internals being machined from 1 piece solid billet steel compared to normal AVM made with cast internals. It will give you info on both if you search Ebay aus. I just brought a set for mine to replace auto hubs on GU. Dont know how they go as I havnt got to fit them yet.
Thirsty GU. TI, 4", 33's, factory locker.
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Re: AVM HP hubs??????

Post by Ferwoaza »

Pretty much the rule of thumb for the AVM's & GU's is standard is weaker than factory, and HP stronger.
Posts: 73
Joined: Mon Jul 18, 2005 3:16 pm
Location: North WA

Re: AVM HP hubs??????

Post by dkne5 »

Just bought and fitted a set too while installing a LOKKA ,took the car out and gave it hell,so far no dramas with the avm's
2002 GU Wagon
6.5 chev diesel.
lifted 3'' front,4'' rear
1'' body lift.
adj panhards front + rear.
adj swaybar link pins.
35'' MTZ
Long range tanks.
twin swing away carrier.
3 x lightforce xgt.
Posts: 17
Joined: Tue Jul 07, 2009 7:46 pm
Location: Tin Can Bay

Re: AVM HP hubs??????

Post by nobbie »

i got them fitted few months back replaced auto's no problems so far.
Posts: 150
Joined: Sun Jan 20, 2008 9:06 pm
Location: swan valley

Re: AVM HP hubs??????

Post by uzdnabuzd »

cool thanks for the reply guys.

is anyone runniing them on a comp truck??

i blew 2 factory manual hubs in one hit on the weekend. I dont want to run drive flanges or chromo superior housings as i am happy with the fuse being a hub, however something slightly stronger than factory would be great.

Cheers

Zac
Posts: 150
Joined: Sun Jan 20, 2008 9:06 pm
Location: swan valley

Re: AVM HP hubs??????

Post by uzdnabuzd »

so any news??????

Or based on the no replys should i assume that they are crap?

Cheers
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests