Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mounting points for tray after cab cut

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 94
Joined: Tue Jun 21, 2005 2:37 pm
Location: lismore

mounting points for tray after cab cut

Post by sheriff »

hi guys im trying to work out which is the best way to mount a tube tray to my chassis ive just done a wagon chop this is what ive come up with old wagon mounts have been removed

Image
Top
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Re: mounting points for tray after cab cut

Post by turbo gu »

We just did it to a mates Patol wagon. At the front we used from memory 125mm by 100mm by 10mm angle. The 100mm sat on top of the chassis with the 125mm running down on the inside of the chassis.
We bolted it on using grade 10 bolts with crush tube in chassis.

For the rear we again used angle and bolted on using the 12mm rear bumper bar bolts
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Top
Posts: 94
Joined: Tue Jun 21, 2005 2:37 pm
Location: lismore

Re: mounting points for tray after cab cut

Post by sheriff »

yeah that doesnt sound to bad
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Re: mounting points for tray after cab cut

Post by just cruizin' »

don't weld vertically on the chassis rail. If you must put a fish plate on first.
;)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests