Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2" lift, now torque bar doesn't fit

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 68
Joined: Wed Feb 25, 2004 10:08 pm
Location: Drewvale, Brisbane

2" lift, now torque bar doesn't fit

Post by DUR71 THOUGHTS »

OK put a 2" lift on my Hilux today but now the torque bar wont fit. Any suggestions on what to do about this guys. The bar only needs to be about 5mm longer.

What function does this bar perform. My book just tells me what it is called not what it does. I have taken it out for now car still seems to drive OK.

Any one else have this problem???
83 Hilux 2.2L Diesel
2" lift kit
31" Simex Centipedes
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

Tough Dog make an adjustable torque rod.....I should know, I have two of them on my uppers for the stock 5 link rear to adjust the pinion angle after the 2.5" spring lift. ~$100 each.
Last edited by DamTriton on Wed Mar 24, 2004 7:06 am, edited 1 time in total.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

I replaced mine with an adjustable one, plenty of room to move.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Hilux "may" dive under brakes, be careful. Kits are avaiable to lift them plus check aftermarket as above.

Bazzle
Top
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

I got mine through Snake Racing, I think it was a Tough Dog brand or something like that. Have had no problems so far... :D
Top
Posts: 68
Joined: Wed Feb 25, 2004 10:08 pm
Location: Drewvale, Brisbane

Post by DUR71 THOUGHTS »

Sounds like an adjustable one is the go. Just tried to force this one on again but there is no chance in hell of it fitting.

Thanks for your help guys.
83 Hilux 2.2L Diesel
2" lift kit
31" Simex Centipedes
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Re: 2" lift, now torque bar doesn't fit

Post by MissDrew »

DUR71 THOUGHTS wrote:I have taken it out for now car still seems to drive OK.
Now go and jump on the breaks really hard when doing say 110km/hr :shock:
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Re: 2" lift, now torque bar doesn't fit

Post by hypo »

Guts wrote:
DUR71 THOUGHTS wrote:I have taken it out for now car still seems to drive OK.
Now go and jump on the breaks really hard when doing say 110km/hr :shock:


mine never had a prob even wen i was running j-arm steerin, maybe my leave were to stiff and not allowing enuf axle rap 2 make it brake steer :?
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Mine did, was after I fitted the 4 inch superlift about 5.5 years ago. What a waste of money that was :roll: But I never tried it at 110, only at about 60 and that was bad enough.
Top
Posts: 68
Joined: Wed Feb 25, 2004 10:08 pm
Location: Drewvale, Brisbane

Post by DUR71 THOUGHTS »

Drove it yesterday and didn't notice anything unusual about the steering or braking but will pick up an adjustable one tomorrow so I can go to Ormeau this weekend. :D
83 Hilux 2.2L Diesel
2" lift kit
31" Simex Centipedes
Top
Posts: 3614
Joined: Sat Nov 02, 2002 9:02 am
Location: Gold Coast

Post by 83 lux »

never hard one in there and its fine
leave it out
HOOLAY Wish i could buy boggers for my DH bike
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

i took mine for a spin up the putty road the other weekend without the rod, it was ok, i could predict the bump steer and would let the well jump around a little and it kept going straight, but when i was breaking to stop at the traffic light and change lanes at the same time it was very interesting, glad there was no other traffic was around.
www.overkill4x4.com
ph 94766137
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 6 guests