Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Wiring up a carb dizzy zook motor
Wiring up a carb dizzy zook motor
I feel stupid asking this question but Im having issues getting a spark on my g10a motor. It is the same as a 1.3 cab set up just 3 cylinder. I have a positive wire going to the positive side of the coil and then to the black with a white trace out of the dizzy. then negitive to the brown wire off the dizzy. Is this right?
Its a wheelbase thing
Re: Wiring up a carb dizzy zook motor
sounds about right to me.
have you checked the coil actually works ?
have you checked the coil actually works ?
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Re: Wiring up a carb dizzy zook motor
I tryed it with two coils. Neither of them were the bottle looking ones thoe.
Its a wheelbase thing
Re: Wiring up a carb dizzy zook motor
points or electronic ignition
Who is online
Users browsing this forum: No registered users and 46 guests