Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Head Reconditioning in Brisvegas

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 365
Joined: Thu Oct 24, 2002 1:38 pm
Location: Brisbane, Nthsider

Head Reconditioning in Brisvegas

Post by redrocket »

Hey i was gunna get some prices to reco the heads on my 3.0l V6 paj motor cause the valve stem seals are worn. How much should i expect to pay and can anyone recommend some good shops to do it.

thnx in advance.
"If it ain't broken, smash it harder, then make it stronger!"
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

Gilberts Cylinder Head Service in Southport.

I used to work there. 100 percent every time.

GILBERT'S P & A CYLINDER HEAD SERVICE
27 Margaret St Southport 4215 (07) 5532 2249
Mobile Service 0413 157 983
Southport Fax 4215 (07) 5591 7553

Or your local mechanic??

TOM
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Re: Head Reconditioning in Brisvegas

Post by RUFF »

redrocket wrote:Hey i was gunna get some prices to reco the heads on my 3.0l V6 paj motor cause the valve stem seals are worn. How much should i expect to pay and can anyone recommend some good shops to do it.

thnx in advance.


You should be able to replace these without removing the Cylinder heads.
Top
Posts: 365
Joined: Thu Oct 24, 2002 1:38 pm
Location: Brisbane, Nthsider

Post by redrocket »

yeah i have heard some tricks with rope but they need some new exhaust studs as well and some new seals.
"If it ain't broken, smash it harder, then make it stronger!"
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Don't know how much, but I have had a couple of heads done before by Jondav engines at slacks creek. They do a really good job and the prices are very reasonable.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

just need to stick pressurised air down the spark plug hole or glow plug hole (for diesels)

then i have a tool which compresses the spring on top of the head, you just pull it out replace and reassemble, pretty simple, really

I had good success with a place at slacks creek the other day:

All Engine Parts
3208 8755
They sell brand new heads pretty cheap.
hands and mums dont count!!!
Top
Posts: 365
Joined: Thu Oct 24, 2002 1:38 pm
Location: Brisbane, Nthsider

Post by redrocket »

so you wanna do it for me then?
"If it ain't broken, smash it harder, then make it stronger!"
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

I have one of those air hose connections for filling the cylinder with compressed air so that the valve stays up. I think it cost me about $35 which is gonna be heaps chepaer than headgaskets.

Still work out cheaper even IF you had to buy a Supercheap air compressor

;)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests