Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
flipped rims
Moderators: toaddog, TWISTY, V8Patrol, Moderators
flipped rims
just wondering for ordering purposes would a flipped rim have a zero offset cheers col
Re: flipped rims
Mate, they'd be more like -40 to -60 offset and you'd probably have to have them custom made.
Zero or (even positive) offset is what you'll see on many new cars where the wheel rim is set further in on the centre the hub (a flat faced looking wheel).
The more "negative" offset you have the further out from the hub the rim of the wheel is and have a "deep dish " look about them.
Zero or (even positive) offset is what you'll see on many new cars where the wheel rim is set further in on the centre the hub (a flat faced looking wheel).
The more "negative" offset you have the further out from the hub the rim of the wheel is and have a "deep dish " look about them.
Don't take life too seriously...it isn't permanent.
Re: flipped rims
You talking offset from centre of rim width or backspacing which is taken from inside rim bead.
brooksy
brooksy
C44F-Custom 4x4 Fabrications
0400 443 802
brooksy72@live.com.au
0400 443 802
brooksy72@live.com.au
Who is online
Users browsing this forum: No registered users and 97 guests