Hi . I have nissan patrol mq 1982- 1984 with c200 axles 29 spline front and rear. I am looking for stock or stronger axle shafts. Do you know where a can buy?
Thanks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
PATROL MQ C 200 AXLE SHAFTS
Re: PATROL MQ C 200 AXLE SHAFTS
Stock axle shafts are good up to 35"(simex, silverstone etc.) and even for bigger less agresive tires.
In the rear just fit H233B axle with the same gearing - it is much stronger than C200.
Also rear C200 had LSD, which you can fit in front axle.
In the rear just fit H233B axle with the same gearing - it is much stronger than C200.
Also rear C200 had LSD, which you can fit in front axle.
Re: PATROL MQ C 200 AXLE SHAFTS
Thanks ,i know that. I have those axles on susuki samurai with 35' tyres. i have all ready arb front and rear and it's difficult to change the complete axle . I want half safts front and rear . Please if you know where i can buy tell me.
thanks
thanks
Re: PATROL MQ C 200 AXLE SHAFTS
anyone who knows where i can buy half shafts?
Re: PATROL MQ C 200 AXLE SHAFTS
I am in Greece and i don;t know any site can you help me?
Re: PATROL MQ C 200 AXLE SHAFTS
Half Shafts?
CV?
CV?
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Re: PATROL MQ C 200 AXLE SHAFTS
WICKED wrote:Half Shafts?
CV?
Axle Shafts
Re: PATROL MQ C 200 AXLE SHAFTS
MANOSF wrote:WICKED wrote:Half Shafts?
CV?
Axle Shafts
No one makes an upgraded Axle for the C200. You can use GQ CV's but that's it.
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Re: PATROL MQ C 200 AXLE SHAFTS
The problem with rear C200 diffs is that it's snapping axles in diff centre, where they are thin. H233B are few mm bigger and a lot more durable.
Re: PATROL MQ C 200 AXLE SHAFTS
I am looking for stock axle shafts. can you tell me where i can find ? If you know give me e mail address.
Re: PATROL MQ C 200 AXLE SHAFTS
wrecker's ?, ebay ?, Nissan ?03 TJ sport skyjacker/warn stuff and some bling :) - been around Jeeps before, this is my 1st,
NOW I UNDERSTAND :)
NOW I UNDERSTAND :)
Re: PATROL MQ C 200 AXLE SHAFTS
The best option to aquire a half shaft is to just contact your local nissan dealer and order them.
Nissan partnumber 39100C7400 for the RH side and 39101C7400 for the LH side.
I've never snapped one in ten years.
Don't run full locker in the front that's best.
Nissan partnumber 39100C7400 for the RH side and 39101C7400 for the LH side.
I've never snapped one in ten years.
Don't run full locker in the front that's best.
Who is online
Users browsing this forum: No registered users and 0 guests