Hi all,
have tried search but come up with nothing, im having major issues with my bonnet, it wont pop open anymore, after adjusting the cable a few times it worked, then it stopped. Ive found if someone is applying upward pressure to it it goes first time? Could this be because my bonnet stops are worn to metal nubs with duct tape on em and arent holding the weight up anymore?
Cheers
Dan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bonnet wont open 89 GQ
Re: Bonnet wont open 89 GQ
sounds to me like ur cable might be streched a bit to much
gq patrol / mavrick bullbar spotties no mud flaps need money
Re: Bonnet wont open 89 GQ
mine did the same thing. i took the bonnet lock off by the 2 x 10 or 12 mm bolts and washed it in petty to remove all the mud etc, sprayed it with inox/wd40/crc. then put heater hose on the bonnet stops and cut to height or you can use rear shock rubbers as they fit to. this fixed it for me. just make sure you set the bonnet catch at the right height when you fit it back on.
this also helps if it isnt catching/locking when you close it. good luck.
this also helps if it isnt catching/locking when you close it. good luck.
only the first roll hurts, then its a ride..
Who is online
Users browsing this forum: No registered users and 119 guests