Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ls1 clutch

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 26
Joined: Fri Nov 26, 2004 5:00 pm
Location: austrilia

ls1 clutch

Post by rockman »

got a marks4x4 ls1 to nissan 5speed just wondering if i need the clutch master cylinder and slave that they sell? all so does a off the shelf clutch fit.
Top
Posts: 1
Joined: Fri Aug 24, 2007 5:51 am
Location: Hunter Valley

Re: ls1 clutch

Post by browny »

I did buy the marks slave and master cylinder because the travel needed from the slave to operate clutch correctly is a lot longer than the nissan clutch requires. Apparently you could get your original slave resleaved but i found it easier to just buy the matching cylinders from marks. All new and just bolt on. I also bought a 12" heavy duty clutch from sunbury brakes online. Was about $750 for new clutch and flywheel. Just ring and tell them what you are doing. It was no problem and works well.
Top
Posts: 26
Joined: Fri Nov 26, 2004 5:00 pm
Location: austrilia

Re: ls1 clutch

Post by rockman »

thanks for that. i was hoping the master and slave would be a off the shelf product so if you are any where it would be easy to get.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 80 guests