Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear axles

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 17
Joined: Fri Jan 01, 2010 8:30 pm
Location: Rockhampton

Rear axles

Post by alex_trovato »

I am looking at buying some cromoly cvs and axles, i only have 31s on at the moment and wont be going any bigger then 33's just wondering if i should get rear ones aswell or just wait till i break them?

Cheers
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Re: Rear axles

Post by BlueSuzy »

Have you broken them on 31's?

Really depends on driving style. I know someone that can snap bigger vit axles on 29's... :shock:

I run 33's, rear is permanently locked. I have never snapped a front cv/axle, but open diff front.

The only time i have snapped a rear axle was when the centre gave way from too much backlash, and dropped the carrier, shearing the axle...
I am Tim
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Re: Rear axles

Post by droopypete »

alex_trovato wrote:I am looking at buying some cromoly cvs and axles, i only have 31s on at the moment and wont be going any bigger then 33's just wondering if i should get rear ones aswell or just wait till i break them?

Cheers
The problem with that is you rarely break parts in the workshop sitting on concrete under a roof whilst surrounded by air tools, axle stands and a fridge,
it is usually on a track, buried in mud, in the rain, whilst surrounded buy mates who are being held up, getting wet and wishing you had put your chro mo's in last week end.
Fit the chro mo's and leave the spares at home.
Peter.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
User avatar
dad
Posts: 394
Joined: Mon Dec 31, 2007 8:27 am
Location: sydney

Re: Rear axles

Post by dad »

I have seen a few snapped chromo rears, but not front ones, i dont think they're any better than the stock ones.

With and without lockers, i've broken a stack of cv's, but have only ever stripped the spline on rears once due to cracks in my side gears.

Spend the money on something else.
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Re: Rear axles

Post by bazooked »

upgrade ur front ones, i ran 33 jt2s and never had a problem, also ran cromos in the rear and broke them, ya better of with standard axles in the back.
buggy time............
Posts: 17
Joined: Fri Jan 01, 2010 8:30 pm
Location: Rockhampton

Re: Rear axles

Post by alex_trovato »

Thanks for the info, i havent broke anything yet, might just get the fronts for now and hope the rear holds up.

Cheers
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: Rear axles

Post by Guy »

bazooked wrote:upgrade ur front ones, i ran 33 jt2s and never had a problem, also ran cromos in the rear and broke them, ya better of with standard axles in the back.

You reckon ?
Your saying you busted Chro-mo's that are undeiably way harder to kill that the standard units ... but you recommend standards in the back .. I would have thought that you would simply kill the stock ones sooner.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Re: Rear axles

Post by bazooked »

love_mud wrote:
bazooked wrote:upgrade ur front ones, i ran 33 jt2s and never had a problem, also ran cromos in the rear and broke them, ya better of with standard axles in the back.

You reckon ?
Your saying you busted Chro-mo's that are undeiably way harder to kill that the standard units ... but you recommend standards in the back .. I would have thought that you would simply kill the stock ones sooner.
I thought the same aswell but real world testing proved otherwise, I found them to be to brittle, unless things have changed since then!
buggy time............
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: Rear axles

Post by Guy »

bazooked wrote:
love_mud wrote:
bazooked wrote:upgrade ur front ones, i ran 33 jt2s and never had a problem, also ran cromos in the rear and broke them, ya better of with standard axles in the back.

You reckon ?
Your saying you busted Chro-mo's that are undeiably way harder to kill that the standard units ... but you recommend standards in the back .. I would have thought that you would simply kill the stock ones sooner.
I thought the same aswell but real world testing proved otherwise, I found them to be to brittle, unless things have changed since then!
There you go .. nothing like real world product testing to show up the flaws in a product.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 538
Joined: Tue Jan 13, 2009 3:52 pm
Location: sydney

Re: Rear axles

Post by danssurf82 »

:) i have snapped over 15 rear axels in my vitara... on 29's and 31's.... i do have a rear locker and heavy right foot...
i would get the chromos...
[quote="MissForby"]"I like Pillows. I'm not allowed anything hard" :D[/quote]
94 vitara, rear air locker, 31's, dual battery, custom front and rear tube bars, chopped guards, reduction gears
Posts: 242
Joined: Thu Jun 15, 2006 10:24 pm
Location: sydney

Re: Rear axles

Post by hyzook »

love_mud wrote:
bazooked wrote:
love_mud wrote:
bazooked wrote:upgrade ur front ones, i ran 33 jt2s and never had a problem, also ran cromos in the rear and broke them, ya better of with standard axles in the back.

You reckon ?
Your saying you busted Chro-mo's that are undeiably way harder to kill that the standard units ... but you recommend standards in the back .. I would have thought that you would simply kill the stock ones sooner.
I thought the same aswell but real world testing proved otherwise, I found them to be to brittle, unless things have changed since then!
There you go .. nothing like real world product testing to show up the flaws in a product.
I agree, the cromo ones don't cut it...
Image
Image
Image
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Re: Rear axles

Post by joeblow »

mmmmmm.......i reckon that spline is way too short!
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Re: Rear axles

Post by droopypete »

It is a new type of locker Joe (keep up!) the right axle is 300mm longer than stock and goes all the way through the center engaging both side gears, then the left axle is 300mm shorter and it is joined to the the other with an internally splined sleeve providing positive locking of both axles, air lockers are "so" yesterday.
Peter.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Posts: 242
Joined: Thu Jun 15, 2006 10:24 pm
Location: sydney

Re: Rear axles

Post by hyzook »

joeblow wrote:mmmmmm.......i reckon that spline is way too short!
I found that rather interesting too, they were Calmini axles.
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Re: Rear axles

Post by joeblow »

droopypete wrote:It is a new type of locker Joe (keep up!)

thought the japs have been doing it this way for donkeys?


droopypete wrote: air lockers are "so" yesterday.
Peter.

:shock: ...........say its not so!
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests