Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3/4 front with shackle rev

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 46
Joined: Tue Aug 05, 2003 8:44 pm

3/4 front with shackle rev

Post by bill »

havnt heard of any body doing this ,is there a reason why ?
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

your front drive shaft would cry!

that pinion is gonna all over the place :shock:
Posts: 638
Joined: Mon Nov 04, 2002 7:52 am
Location: A little north of sydney

Post by dave »

Sam from Overkill run this on his old old old bazook. Did'nt do that much.
Had probs with steering run a panhard rod to stop the diff walking sideways when steering. Had a few dramers with the bolts holing 3/4 spring coming lose.Hope this helps.
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Re: 3/4 front with shackle rev

Post by bigsteve »

bill wrote:havnt heard of any body doing this ,is there a reason why ?


Have seen it on a certain Vic zook that is currently sleeping but Ithink Suspension mods have evolved nowadays.
yeshemesh
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Re: 3/4 front with shackle rev

Post by greg »

bigsteve wrote:Suspension mods have evolved nowadays.


I agree - it would be far easier to put some longer than standard springs in the front and run with that... This will provide heaps of droop etc without creating too many other issues.
DMA Founding Member #1 - Now Retired
Post Reply

Who is online

Users browsing this forum: No registered users and 63 guests