Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
congrats BAZOOKED
congrats BAZOOKED
well done bazooked for gettin in 4wd monthly
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
bazooked wrote:woohoo
bout time ,shame no 1 rang me bout it
so hows the pics did they come out good?
no they are realy fuzzy an pixilated for some reason
jk they are clear as. did u have your tyres aired down at all??
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
I went back and read the write up - looks good bazooked.
A few questions though:
1. why is your door open in the first photo? it looks like you're bailing out a bit
2. 9" longer than stock springs - but your front diff only went forward an inch?
3. Is the roll cage only covering the rear area? i gather it doesn't come between the A and B pillars?
A few questions though:
1. why is your door open in the first photo? it looks like you're bailing out a bit
2. 9" longer than stock springs - but your front diff only went forward an inch?
3. Is the roll cage only covering the rear area? i gather it doesn't come between the A and B pillars?
DMA Founding Member #1 - Now Retired
Who is online
Users browsing this forum: No registered users and 1 guest