hay guys i have a 1985 mk patrol shorty with a 3 inch suspension lift and i want to know what i have to do for a 2 inch body, what do i have to extend and modify if i have to. Im guessing the usual modify the brackets for the bullbar and shifters for the gear box. But im mainly concerned about extending brakes lines and wirring if I have to...?
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
mk body lift
Re: mk body lift
Best thing to do (with any vehicle), climb underneath and look around for anything that runs from chassis to body. From there you can work out how to modify it or relocate mounts etc. One thing that often gets missed is the fan shroud. Brake lines are usually coiled and will allow the lift. Steering may bind up too, so check how it's going to move when you go up.
Don't take life too seriously...it isn't permanent.
Who is online
Users browsing this forum: No registered users and 0 guests