Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1999 Petrol Gu front tail shaft

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2
Joined: Thu Nov 11, 2010 12:54 pm

1999 Petrol Gu front tail shaft

Post by shauni18 »

hey guys. i have just got a 5 inch lift fitted to my 1999 Gu st 4500 patrol and noticed there is minimal clearance in between my front tail shaft and the crossmember on the chassis. what can i do to get more clearence. cheers
Top
Posts: 82
Joined: Tue Oct 26, 2010 6:40 am

Re: 1999 Petrol Gu front tail shaft

Post by lozz_ti »

i fitted 15mm spacers between the chassis and the crossmember and had to put longer bolts in aswell on my gq to get more clearance but it still rubbed when flexing or going around right turns. i ended up knotching out the cross member and welding a plate in there.

regards lozz
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Re: 1999 Petrol Gu front tail shaft

Post by ludacris »

You have to cut out that piece of the cross member that the front tail shaft rubs on. :D

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 2
Joined: Thu Nov 11, 2010 12:54 pm

Re: 1999 Petrol Gu front tail shaft

Post by shauni18 »

cheers guys.. will get onto that asap.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests