Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

engine mounts

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 261
Joined: Tue Apr 07, 2009 12:38 am
Location: Melbourne

engine mounts

Post by mellows40 »

Hi guys.. can some one tell me what engine mount bolts to use on my 40... i need to replace the rear two bolts. and the wreckers near me was no help

Thanks
Mine: A Tough little fj40
and a 105 series diesel
Hers: TJ Jeep Wrangler... Stock
Cheers Eric
Top
Posts: 280
Joined: Tue Feb 16, 2010 1:21 pm
Location: Werribee

Re: engine mounts

Post by MrGrim »

wich ones you need as i just pulled all myn out and dont need them
71 fj40 front shackle reversal +3" , 55 rear springs +3", 35 15.5 claws , 60 diff's 4wheel disc's , SOON TO BE WINDSOR V8 + 5 speed
74 fj40 stock but very clean
84 bj40 3b stock and unloved
Top
Posts: 261
Joined: Tue Apr 07, 2009 12:38 am
Location: Melbourne

Re: engine mounts

Post by mellows40 »

Mr grim,
I was going to replace all 4 bolts with new ones and was after size and thread pattern, ie metric, af, fine, course thread as i dont know.
Thanks for the offer of bolts but as with your 40's it is a project that when i replace stuff i try where ever possible to upgrade or put in new stuff.
cheers Eric
Mine: A Tough little fj40
and a 105 series diesel
Hers: TJ Jeep Wrangler... Stock
Cheers Eric
Top
Posts: 246
Joined: Wed Jun 03, 2009 2:01 pm
Location: Ipswich

Re: engine mounts

Post by Narrowscopeofreality »

Could you just pull another engine mount bolt and take it to a bolt shop? Seems pretty straight foward, but I have had a few beers soo... :lol: :armsup:
'96 Lux - DD
'79 BJ40 - Project
'81 BJ42 - Got the bug
Top
Posts: 280
Joined: Tue Feb 16, 2010 1:21 pm
Location: Werribee

Re: engine mounts

Post by MrGrim »

mellows40 wrote:Mr grim,
I was going to replace all 4 bolts with new ones and was after size and thread pattern, ie metric, af, fine, course thread as i dont know.
Thanks for the offer of bolts but as with your 40's it is a project that when i replace stuff i try where ever possible to upgrade or put in new stuff.
cheers Eric
all good just trying to help out " and off load the left over junk i now have heaps" :armsup:
71 fj40 front shackle reversal +3" , 55 rear springs +3", 35 15.5 claws , 60 diff's 4wheel disc's , SOON TO BE WINDSOR V8 + 5 speed
74 fj40 stock but very clean
84 bj40 3b stock and unloved
Top
Posts: 261
Joined: Tue Apr 07, 2009 12:38 am
Location: Melbourne

Re: engine mounts

Post by mellows40 »

Narrowscopeofreality wrote:Could you just pull another engine mount bolt and take it to a bolt shop? Seems pretty straight foward, but I have had a few beers soo... :lol: :armsup:
Yep thats what i've decided will be the easiest.... just wanted to get organized first though
Mine: A Tough little fj40
and a 105 series diesel
Hers: TJ Jeep Wrangler... Stock
Cheers Eric
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests