hope fully someone can help
i've got 1994 hzj75 and she's got some unhealthy noises in 4th and 5h and i had bought a hj60 for 2k for a motor a few years back and recently decided to swap the gearboxes over and come this morning pulled the box out of the 75 and relises the input shaft is a different spline and length and i'm looking for the easiest and cheapest way to solve this problem.
any info would be much appreciated
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
H55F swap
Moderators: toaddog, Elmo, DUDELUX
Re: H55F swap
Swap the input shafts.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Re: H55F swap
is there an easy way to do that from what i see i need dissemble the gearbox
Re: H55F swap
Not to sure myself sorry, go over to iH8mud forums I think some guys there have a description on how they have done it.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Who is online
Users browsing this forum: No registered users and 0 guests