Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Verticore 3XP

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Verticore 3XP

Post by eliteforce32 »

so need a little help from some fellow tradesmen (Boilies/1st class welders), need some voltage settings for verticore 3xp for vertical up min 12mm m/s plate normal 2 run pass. Used this wire years ago in 1.6mm with CO2 but am a little rusty :? use 311, 232 and 233 a fair bit as well as higher specifed solid wires but need a hand for 6g weld test for a new job, any help would be great :armsup: . oh and only for xp wires :finger:
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Re: Verticore 3XP

Post by eliteforce32 »

fogot to add will be im told either miller or lincoln 500 amp sources and lincoln squirts.
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Posts: 30
Joined: Wed Feb 17, 2010 8:12 pm
Location: townsville

Re: Verticore 3XP

Post by scott/gqfun »

its a ease wire to use. with 1.6 id start around the 25v mark.
Top
Posts: 721
Joined: Sun Apr 24, 2005 3:01 pm
Location: on top of a large pile of rocks

Re: Verticore 3XP

Post by AFeral »

I usally start at 27v. Most manufacturers have data on there wires on line. That would be my starting point.
Nothing beats welding vertical up with no weave using 3xp, pipe welding is also a lot easyer.
Feral
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Top
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Re: Verticore 3XP

Post by eliteforce32 »

thanks boys thats the start i need :D
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 29 guests